ERP for Paint & Coatings Manufacturers

ERP for paint and coatings manufacturers:every batch, every shade, every dealer

Pothera ERP runs a paint plant from raw-material receipt to dealer dispatch on one system. Formulas are version-controlled, batches are planned from orders and stock, dispersion, milling and tinting are recorded stage by stage, shade, viscosity and gloss are checked against standards before filling, and every can carries a batch number you can trace back to the resin and pigment lots it came from.

Demo on your own process · Live in 8–12 weeks · Cloud or on-premise

How is paint made in a factory, step by step?

A typical paint plant weighs raw materials (resins, pigments, extenders, solvents or water, additives) to a formula, pre-mixes them, disperses and mills the pigment to the right fineness, lets the batch down with the remaining binder and solvent, tints and adjusts it to the target shade, tests it for shade, viscosity, gloss and drying, then filters and fills it into pack sizes, labels it with a batch number and dispatches it to depots and dealers.

  • Decorative paint makers selling through dealers and depots
  • Industrial and protective coatings manufacturers
  • Powder coating, primer, putty and distemper producers
  • Contract (toll) manufacturers producing for brands
Challenges we solve

The problems paints & coatings businesses bring to us

Six situations we hear most often — and how Pothera handles each one.

Shade inconsistency between batches

Customers notice when this lot does not match the last one, and rework eats margin.

With PotheraShade, viscosity and gloss are set as QC parameters with standard values; every batch is inspected before filling and rejections are analysed by reason.

Quality

Formulas living in a chemist’s notebook

Uncontrolled revisions, substitutions nobody approved, and cost that nobody can calculate.

With PotheraVersion-controlled formula and recipe management, with substitute items, expected losses and overheads defined on the BOM.

Production & Planning

Raw material price swings

Resin, TiO₂ and solvent prices move monthly; quoted prices go stale.

With PotheraPurchase compares supplier quotations and import landed cost; perpetual inventory costing shows the real cost of each batch.

Purchase & MRP, Accounts

No batch genealogy for complaints

When a dealer reports peeling or settling, you cannot say which raw-material lots went in.

With PotheraBatch numbers at receipt and production, with lot genealogy forward and backward.

Inventory, Production

One batch, many pack sizes

A 2,000-litre batch becomes 1 L, 4 L, 10 L and 20 L packs; stock and costing get messy.

With PotheraRe-packing is handled as its own production step, so pack-size stock and cost stay accurate.

Production, Inventory

Dealer schemes and depots

Slab schemes, loyalty and discounts run differently across depots and are reconciled by hand.

With PotheraSchemes, loyalty points and customer-wise discounts apply by rule; multi-location stock with inter-depot transfers.

Sales & Distribution
Recognise two or more of these?A 20-minute call is enough to see whether Pothera fits your business.
How it works

The paints & coatings process, step by step in Pothera

What happens on the floor at each step, what Pothera records, and the document it creates.

  1. 1

    Raw material receipt & inward QC

    On the floor
    Resins, pigments, solvents and packing material arrive; samples are checked.
    In Pothera
    GRN against PO with batch, manufacturing and expiry date; inward inspection against QC parameters.
    GRN, inward inspection
  2. 2

    Formula selection & batch planning

    On the floor
    Planner picks the formula version and batch size for open orders and stock gaps.
    In Pothera
    Version-controlled formula (BOM); production plan from demand, stock and reorder levels.
    Production order
  3. 3

    Weighing & pre-mix

    On the floor
    Materials are issued and charged in sequence.
    In Pothera
    Material issue against the production order; substitute items only as defined.
    Material issue
  4. 4

    Dispersion & milling

    On the floor
    Pigment is dispersed and ground to the target fineness.
    In Pothera
    User-defined production stage with machine and operator recorded; process-wise quality check.
    Stage entry
  5. 5

    Let-down, tinting & shade adjustment

    On the floor
    Remaining binder/solvent is added; the batch is tinted to the standard.
    In Pothera
    Stage entry with additions recorded; WIP inspection for shade and viscosity.
    Stage entry, WIP inspection
  6. 6

    Final QC

    On the floor
    Shade (ΔE), viscosity, gloss, drying and density are tested.
    In Pothera
    FG inspection against standard values; batch released or held; rejection reason recorded.
    FG inspection
  7. 7

    Filling, labelling & packing

    On the floor
    Batch is filtered and filled into pack sizes with batch-coded labels.
    In Pothera
    Re-packing step; barcode labels; finished-goods receipt by batch.
    FG receipt
  8. 8

    Depot & dealer dispatch

    On the floor
    Stock moves to depots and dealers under schemes.
    In Pothera
    Sales orders, schemes and loyalty, deliveries and GST e-invoices; inter-location transfers.
    Delivery, e-invoice
Key features

Everything a paints & coatings business needs, on one platform

Pick an area to see what it covers.

Formulation & production

  • Version-controlled formulas
  • Multi-level BOM with substitutes, scrap and loss
  • Batch and continuous production
  • User-defined stages
  • Re-processing and re-packing

Quality

  • Inward, WIP and FG inspection
  • QC parameters with standard values
  • Rejection reason analysis
  • Non-compliance and corrective action

Inventory & traceability

  • Batch/lot with manufacturing and expiry dates
  • Lot genealogy
  • FIFO/LIFO/weighted average
  • Barcode
  • Multi-location

Purchase

  • MRP-based indents
  • Quotation comparison
  • Import landed cost

Sales & distribution

  • Dealer schemes, loyalty and discounts
  • Targets
  • GST e-invoicing

Finance

  • Batch-level costing
  • Cost centres
  • Location-wise P&L
Compliance

Compliance built into daily work

  • GST e-invoicing integrated through API, and multi-currency for raw-material imports.
  • Batch-coded labels and lot genealogy support complaint investigation and recalls.
Reports you will use

KPIs on your dashboard from week one

  • Batch yield vs standard
  • Rejection and rework by reason and product
  • Raw-material cost per batch
  • Stock by depot and pack size
  • Dealer-wise sales and scheme cost
Before and after

What changes when you move to Pothera

Spreadsheets / accounting software With Pothera ERP
Formula control Notebook or Excel Version-controlled formulas with approved substitutes
Shade and viscosity checks Lab register QC parameters recorded per batch before filling
Batch traceability Partial, manual Lot genealogy from raw material to can
Pack-size stock Counted separately Re-packing recorded from the parent batch
Dealer schemes Reconciled by hand Applied by rule on every invoice
From our implementation team

Lock the formula before you scale the batch

Most shade complaints trace back to an unapproved substitution or a manual scale-up, not the operator. Keep one approved version per formula, define allowed substitutes in the system, and let the batch quantity drive the material issue. Shade adjustments still happen; they are simply recorded against the batch.

Implementation

Go live in 8–12 weeks

A fixed six-phase plan for 10 to 100 users, configured for paints & coatings.

  1. Weeks 1–2Discover

    Plant walk-through, scope and success measures.

  2. Weeks 2–4Design

    Masters, BOMs, routings and approval rules.

  3. Weeks 3–6Configure

    Workflows, formats, reports and dashboards.

  4. Weeks 5–8Migrate

    Stock, balances and open orders reconciled.

  5. Weeks 7–10Train & test

    Role-wise training, UAT and parallel run.

  6. Weeks 9–12Go live

    Cut-over, hypercare and first month-end close.

What we configure for your paints & coatings business

  • Your formula library, versions and approved substitutes
  • Production stages: pre-mix, dispersion, milling, let-down, tinting, filling
  • QC parameters: shade, viscosity, gloss, fineness, density, drying time
  • Pack sizes and labels
  • Dealer schemes, depots and price lists
Plan your go-live dateGet a written 12-week plan with scope, milestones and a cost basis.

Trusted by businesses like yours

Customer proof

Manufacturers across India run on Pothera

Pothera has been built and implemented by Bsquare since 1999.

Read customer stories

“Earlier we were using multiple applications to manage our business, now we have been able to manage our business operations quite seamlessly with pothera software as service ERP solution.”

Raghav Malik · Managing Director, Power Parts
FAQ

Questions about ERP for paints & coatings

What is the best ERP for the paint industry?

The best fit is one that handles formulas and versions, batch production, shade and viscosity QC, pack-size filling, batch traceability and dealer distribution in one system. Pothera covers each of these, along with GST e-invoicing and multi-location stock.

What are the raw materials used in paint manufacturing?

Binders (resins), pigments and extenders, solvents or water, and additives such as dispersants, driers and thickeners, plus packing material. Pothera tracks each by batch with manufacturing and expiry dates from the goods receipt.

Does paint have batch numbers?

Yes. Every production batch should carry a batch number on the label so complaints can be traced. Pothera assigns batch numbers at production and keeps lot genealogy back to the raw-material lots used.

How does ERP help with shade consistency?

By recording the approved formula version, the actual materials issued, any tinting additions and the measured shade, viscosity and gloss for every batch. Over time, rejection analysis shows which products and stages cause deviations.

Can Pothera handle one batch filled into many pack sizes?

Yes. Re-packing is handled as a production step, so a bulk batch can be filled into different pack sizes with stock and cost tracked for each.

Can Pothera manage dealer schemes and loyalty?

Yes. Sales supports promotions, slab schemes, loyalty points and customer-wise discounts applied by rule, with target-vs-actual reporting by dealer, region or product.

What is a paint batch certificate?

It is a record of the tests a batch passed, such as shade, viscosity and gloss. Pothera stores inspection results against each batch, which can be printed for customers.

Does Pothera support both batch and continuous production?

Yes. Pothera’s process manufacturing supports both batch and continuous production models, along with make-to-order and make-to-stock.

How long does a Pothera implementation take for a paint plant?

A typical go-live is 8–12 weeks for 10–100 users, depending on the number of plants, formulas and depots, and how clean your item and formula data is.

Can Pothera work across a plant and multiple depots?

Yes. Pothera connects multiple plants and locations, with location-wise stock, inter-location transfers and location-wise accounts.

See Pothera running your paints & coatings process

Tell us about your business. A Pothera consultant will set up a demo on your own products and flow.

  • A demo of your own process, not a generic tour
  • A written scope, 12-week plan and cost basis
  • No obligation

Prefer to talk? · WhatsApp